Solar Pumping Solutions
solar pumps
Lorentz solar pumps - PS 200
Overview 
- lift up to 50m
- flow rate up to 18,000 Ltrs / day
- DIY installation kit
- virtually maintenance free
- high reliability and life expectancy
- cost-efficient pumping
- 2 year warranty
- Engineered in Germany
- Supplied with high performance Kaneka Panels, 20 year warranty! - Click here for more info>>
Application
- water bores
- windmill replacement
- dams, creeks and rivers
- tanks
PS 200 Daily Flow Chart (litres / day)
| Total Dynamic Head | 5m | 10m | 20m | 30m | 40m | 50m |
| 120 watts - 2 panels | 11000 | 9000 | 6000 | 4300 | 3000 | 2000 |
| 180 watts - 3 panels | 15000 | 13000 | 7500 | 4900 | 4000 | 3000 |
| 240 watts - 4 panels | 18000 | 16000 | 9000 | 5800 | 5000 | 4200 |
Note: all systems are fixed arrays based on 6 kwh per day
Pump Wet End
- helical rotor pump (positive displacement pump)
- two main parts only:stator and rotor
- stator: geometry made of abrasion resistant rubber
- rotor: stainless steel, hard chrome plated, abrasion resistant
- high life expectancy
- self cleaning
- stainless steel non-return valve
- dry running protection via low level probe
Motor
- brushless 3-Phase AC motor
- water filled - no seals to leak
- dynamic slide bearings, material: carbon/ceramic
MPPT Controller
- controlling of the pump system and monitoring of the operating states
- mounted at surface (no submerged electronic parts)
- two control inputs for well probe (dry running protection), float or pressure switches.
- overload protection
- PS 200: speed control, max. pump speed adjustable to reduce flow rate to approx. 50%
- power Pack compatible
Solar Array
- Kaneka thin film PV's generate more power during summer per rated watt than any other type of panel - more info>>
- more power during summer = more water
- 20-25 year warranty on panels
- system expandable up to 300 watts
- tracking options available
Download:
- Click on the link below to download the Technical Sheet
Download PDF (261 kb)