Solar Pumping Solutions
solar hot water
Hills Esteem Evacuated Tube Solar Hot Water - Natural / LPG Gas Boosted
315Lt Gas Boosted 30 Tubes
Product Description
Natural / LPG Gas Boosted, 30 tube collector, 315 litre stainless steel tank, 10 year warranty on major components.
Allocated REC's for this system: 37
Suitable for 4-5 persons
*Available rebates with this system
Federal Gov. - $1,000.00
NSW State Gov. - $1,000.00
Approx REC’s - $1,625.00
Full cost of system $6,569.30
*System cost after rebates $2,944.30 inc GST
All systems must be installed by a qualified plumber to maintain elegibility for rebates and insurance.
Why Hills Evacuated Tube Solar Hot Water Systems are the best!
- Evacuated tubes will save you up to 90% on your annual water heating costs
- Evacuated tubes are tested to -15 degrees C. you won't have any problems with freezing in winter. No anti-freeze chemicals like Glycol are used or needed.
- They are also tesed hail resistant up to 25mm.
- "...The ESTEEM TM Solar Collector is on Average 104% more efficient per m2 of aperture than the Flat Plate Solar Collector..."click here for full information on system efficiency.
- If you break one or two tubes, unlike a flat plate system, ours will continue to operate and you can easily and economically replace any broken tubes.
- If you don't have the ideal Northerly aspect on your roof, because of its cylindrical design the collector can be mounted in other positions and still function.
- You won't have to re-inforce your roof as the tank sits on the ground
- Because the system is modulart is simple to install without the need for cranes or heavy lifting.
- Hills use marine grade, stainless steel tanks - they provide a natural oxide barrier to rust and eliminate the need for a sacrificial anode which saves the cost of replacement every 5 years.
- You can use gas, electricity or waste heat from a wood stove to provide back up heating.
- Eligible for generous government rebates up to $3800.
- Some flat plate systems may offer more REC's however this has been calculated on 'area' covered by extremely large flat panels. As our systems are more efficient they cover less area.
- Hills provide a 10 year warranty on all major components as well as the backing of a known and trusted Australian company.
Hills Esteem Evacuated Tube Solar Hot Water Systems
Climate change due to greenhouse emissions presents an immediate and growing threat to our fragile planet. The sun provides a limitless source of free non-polluting energy every day. A Hills Solar Evacuated Tube Hot Water System can efficiently capture this free energy and provide you with up to 80% savings on your hot water heating costs. Considering Australia is one of the sunniest countries on the planet it makes sense to utilise this resource by installing a Hills EsteemT Solar Evacuated Tube Hot Water System. Not only will you save money but you will also reduce your family's CO2 emissions by up to 3 tonnes per year.
Gas Boosting
Hills Solar offers a choice of gas boosting using Bosch continuous highflow gas booster, 21e or 26e on all GB315 Systems to ensure a continual flow of hot water on low thermal days. When water below 60° C is drawn from the tank, the gas booster will boost the water temperature to 60° C ensuring that only the water drawn is heated; therefore, saving energy.
Evacuated Solar Tubes
Evacuated tube technology delivers significantly better performance than traditional absorbers on the market today. Their advanced design incorporates tubes that consist of 2 layers of borosilicate glass with a vacuum layer between them. The vacuum acts like a thermos flask, retaining up to 97% of the thermal energy, resulting in an increased efficiency.
The Sun’s solar energy is then transferred to the manifold via the heat pipe located in each tube. The small amount of evaporative liquid in each tube is super heated by the Sun’s solar energy and forms into a vapour. The vapour rises to the top of each pipe. 
Heat transfer then occurs between the pipe and water passing through the manifold. The water is then transferred to the tank.
The cylindrical design of the tubes ensures effective collection of the Sun’s solar energy throughout the entire day.
Technical Information
| Bosch Gas Booster | ||
| Bosch product | Bosch 21e | Bosch 26e |
| Bosch part number | YS217ORA | YS267ORA |
| Installation | External | External |
| Ignition | Electronic | Electronic |
| L/min (25°C rise) | 21 | 26 |
| Number of bathrooms | 2 | 2-3 |
| Minimum operating inlet water pressure (kPa) | 100 | 100 |
| Mj/H | 170 | 200 |
| Star rating | 5.56 | 5.53 |
| Minimum flow (L/min) | 2.5 | 2.5 |
| Minimum constant water pressure for maximum flow (kPa) |
130 | 230 |
| Antifrost | Standard | Standard |
| Gas type | NG/LPG | NG/LPG |
| Electrical supply |
230VAC-240V 50Hz 10amp weatherproof power point required within 500mm of the unit |
|
| Unit height (mm) | 520 | 600 |
| Unit width (mm) | 350 | 350 |
| Unit depth (mm) | 170 | 170 |
| Carton weight (kg) | 19 | 22 |
| Natural gas pipe connection |
20mm 3⁄4” | 20mm 3⁄4” |
| LP gas pipe connection | 20mm 3⁄4” | 20mm 3⁄4” |
| Cold water pipe connection |
20mm 3⁄4” | 20mm 3⁄4” |
| Hot water pipe connection |
20mm 3⁄4” | 20mm 3⁄4” |
| Power consumption |
240VAC/36W in standby, 125W when anti freeze mode is on |
|
| 315 Litre Tank | |
| Size in Litres (Actual) | 315 (327) |
| Height | 1980mm |
| Diameter | 580mm |
| Weight Empty | 63kg |
| Weight Full | 390kg |
| Hot Water Outlet | 1495mm |
| Return Flow to Tank | 465mm |
| Cold Water Inlet | 365mm |
| Electric Cable Entry | 255mm |
| Warranty * | Parts | Labour |
| Tank | 10 years | 1 year |
| EST Collectors | 10 years | 1 year |
| Gas Booster Heat Exchaner | 10 years | 3 years |
| Gas Booster - Other Parts* | 3 years | 3 years |
| Pump | 1 year | 1 year |
| Mounting Frame | 10 years | 1 year |
*Conditions Apply. For full details please visit
www.hilllssolar.com.au or view the warranty card.
| Suggested Tank Size |
| 160 Litre# ~ Electric /GasBoosted ~ 1 to 2 People |
| 250 Litre# ~ Electric / Gas Boosted ~ 3 to 4 People |
| 315 Litre# ~ Electric / Gas Boosted ~ 5 to 6 People |
#Suggested usage only.
System Information
| Product Description | 22 Tube Collector | 30 Tube Collector | 30 Tube Collector | 40 Tube Collector |
| Product Code - LPG | GB-315-21LP-22 | GB-315-21LP-30 | GB-315-25LP-30## | GB-315-25LP-40## |
| Product Code - NG | GB-315-21NG-22 | GB-315-21NG-30 | GB-315-25NG-30## | GB-315-25NG-40## |
| Weight - Standard Frame, Manifold & Tubes | 82kg | 108kg | 108kg | 148kg |
| Height of Collector (including Manifold) | 2000mm |
2000mm | 2000mm | 2000mm |
| Width of Collector | 1845mm | 2485mm | 2485mm | 3470mm** |
| Distance between Inlet and Outlet Ports | 1775mm | 2415mm | 2415mm | 3400mm** |
| Surface area of Collector | 3.69m2 | 4.97m2 | 4.97m2 | 6.74m2 |
| Absorber area of Collector | 1.76m2 | 2.40m2 | 2.40m2 | 3.2m2 |
| Aperture area of Collector | 2.086m2 | 2.844m2 | 2.844m2 | 3.792m2 |
| Water that Manifold in Collector holds | 1260ml | 1770ml | 1770ml | 2330ml |
| Weight of Low Pitched Roof Frame | 10.5kg | 11.1kg | 11.1kg | 17.1kg |
| Weight of A-Frame | 11.5kg | 12.1kg | 12.1kg | 19.6kg |
| No. of REC’s for an installation per zone | 22 Tube Collector | 30 Tube Collector | 30 Tube Collector | 40 Tube Collector |
| Zone 1 - 315L 21e and 26e Gas Boosted |
30 | 37 | 37 | 43 |
| Zone 2 - 315L 21e and 26e Gas Boosted |
32 | 39 | 39 | 44 |
| Zone 3 - 315L 21e and 26e Gas Boosted |
30 | 37 | 37 | 43 |
| Zone 4 - 315L 21e and 26e Gas Boosted |
26 | 32 | 32 | 38 |